SKF 322S Single Row Ball Bearings

r0:0.5 mm; B:23 mm; h:6.5 mm; Da max.:111 mm; Calculation factor Y0:0.58; Mass bearing:1.2 kg; Limiting speed:9500 r/min; ra max.:1.5 mm; r1,2 min.:1.5 mm; D:120 mm;

r1,2 min.:2 mm; b:7 mm; Calculation factor Y0:2; Reference speed:2200 r/min; a:74.508 mm; Basic dynamic load rating C:420 kN; Basic static load rating C0:735 kN; Limiting speed:3200 r/min; D:180 mm; Db min.:173 mm;

ba:80.169 mm; Adapter sleeve assembly:SNW 3044x7.7/8; Initial grease fill:1672.65 g; Eye bolt:2 x 1/2-13 UNC; Labyrinth ring:2 x LOR 166; Pa:59.6 kN; Bearing limiting speed:2000 r/min; RG:1 NPT; P150°:136 kN; L:711.2 mm;

Basic Static Radial Load Rating Co:24000 N; B:28.00 mm; Basic Dynamic Radial Load Rating C:27600 N; D:62.0000 mm; d:35.000 mm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:9600 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7400 rpm;

r1,2 min.:0.15 mm; Fatigue load limit Pu:0.006 kN; da min.:5.9 mm; Calculation factor kr:0.02; Da max.:10 mm; Basic dynamic load rating C:0.403 kN; Calculation factor f0:7.1; Mass bearing:0.0018 kg; Basic static load rating C0:0.143 kN; d:5 mm;

B:10.5 mm; Mass shaft washer:0.53 kg; d1:110 mm; r1,2 min.:1.1 mm; d:60 mm;

Da max.:927 mm; Fatigue load limit Pu:780 kN; Misalignment factor k1:0.131; da max.:797 mm; s1 max.:30.7 mm; r1,2 min.:6 mm; B:180 mm; Operating clearance factor k2:0.098; Mass bearing:360 kg; Reference speed:450 r/min;

Threads per inch:12; Hydraulic nut:HMVC 21E; d3 max.:138.252 mm; Mass adapter sleeve assembly:2.05 kg; Lock washer:W 21; B4:21.438 mm; d1:93.662 mm; Sleeve:S 21x3.11/16; d:105 mm; B:19.304 mm;

Permissible sliding velocity v max.:0.5 m/s; Mass bushing:0.008 kg; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; D1:18 mm; Coefficient of friction µ max.:0.15; d:9 mm; B:10 mm;

rs (min):2.5 mm; d2:55 mm; B:29 mm; C:21 mm; D:120 mm; T:31.5 mm; a:38 mm; Static (Coa):136 kN; Pu:16.590 kN; Dynamic (Ca):117 kN;

J max.:333.375 mm; ba:46.831 mm; J1:60.325 mm; A2:155.575 mm; Cap bolt, SAE grade:8; Bearing:23024 CCK/W33; Da:180 mm; da:107.95 mm; Cap bolt:5/8-11 UNC; Ca:55.804 mm;

H:209.55 mm; Mass pillow block:32.2 kg; R1:63.5 mm; P180°:36.9 kN; R2:26.988 mm; Housing:FSAF 616; N1:19.05 mm; A2:233.363 mm; J1:53.975 mm; P90°:55.6 kN;

Hydraulic nut:HMVC 20E; Mass adapter sleeve assembly:2 kg; d3 max.:131.902 mm; Sleeve:S 20x3.7/16; B:19.304 mm; B4:21.438 mm; B1:72.619 mm; G:99.517 mm; Lock washer:W 20; Lock nut:AN 20;

D:225.0000 mm; Sealed Speed Rating n3:2100 rpm; Basic Static Radial Load Rating Co:150000 N; Fillet Radius ra:3.00 mm; B:54.00 mm; Basic Dynamic Radial Load Rating C:186000 N; Grease Speed Rating Open/Shielded n1:3000 rpm; Oil Speed Rating Open/Shielded n2:3600 rpm; Accessories:Without Accessories;

Fillet Radius rb:0.30 mm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:12500 N; Basic Dynamic Radial Load Rating C:17400 N; D:42.0000 mm; B:24.00 mm; Oil Speed Rating n2:16000 rpm; Grease Speed Rating n1:14000 rpm; d:20.000 mm;